Subcategories
RIVA Racing High Performance Hull Plate for Yamaha FX HO and SVHO jet skis 2019 and up ref: RY21120
Tialsport Q-series blow-off valve kit from RIVA Racing in 50mm / 8 PSI for Yamaha and Seadoo jet skis equipped with a compressor. Reference: 002588
Complete decoration kit from RIVOT Racing for Yamaha FX FX HO and SVHO jet skis from 2019 and above, mainly Red & Blue in color Ref. : KDYFXBR
Complete decoration kit from RIVOT Racing for Yamaha FX HO and SVHO jet skis from 2019 and +, mainly in Red & Orange Ref.: KDYFXRO
Complete decoration kit from RIVOT Racing for Jet ski Yamaha FX HO and SVHO from 2019 and + mainly gray & yellow color Ref. : KDYFXGJ
WORX Racing Compressed Discharge Kit for Yamaha Jet Skis Ref: WR04021
Lucky 13 Performance anti-cavitation turbine cone for Yamaha FX SVHO (14+) and FZR SVHO / FZS SVHO (14+). Made of high quality aluminum, this part is supplied with interchangeable rings that will allow you to adjust your turbine to obtain the best performance. Ref: L13-YAM-SVHO
Hydroturf seat cover for Yamaha FX HO, SHO, SVHO jet ski from 2012 to 2018 Reference: SEWFX11
SOLAS Propeller By RIVA for GP1800 ref. YV-CD-13/20
SOLAS propeller for Yamaha GP1800 jet ski Reference: YV-CD-13/18
SOLAS propeller for Yamaha FZR SVHO, FZS SVHO and FX SVHO jet ski (14+) ref. YV-CD-14/21
WORX Racing Direct Intake Kit for Yamaha 1800 Compressed Jet Ski (SHO, SVHO, FZR, FZS, GP1800) Ref.: WR04020
Hydroturf seat cover for Yamaha FX HO Cruiser / SVHO Cruiser and Limited jet skis from 2019 and up Reference: SEWFX3C
Hydroturf seat cover for Yamaha FX HO & SVHO jet skis from 2019 and up Reference: SEWFX3
Pressure regulator kit from the RIVA RACING brand in 24.9psi for jet ski from Yamaha model SHO and SVHO from 2011 and more Reference: RY11740-MS-4
High Flow Injection Rail from RIVA Racing for Yamaha 1800 jet skis all models Reference: RY12040-BFR
RIVA RACING Engine Cooling Upgrade Kit for Yamaha SVHO Jet Ski Ref: RY10041-ECUK-PC-2
RIVA Cylinder Head Stud Kit for Yamaha SHO / FZR / FZS Ref: RY10040-HSK
Riva Free Exhaust for Yamaha FX HO and FX SHO 2012+ / FX SVHO Removes the noise reduction system and keeps the original exhaust outlet. ref. RY16070
RIVA Racing air filter kit for Yamaha jet ski: - GP 1800R HO (1.8L & 1.9L) from 2020 and up - FX HO (1.8L & 1.9L) from 2012 and up - VX HO (1.8L & 1.9L) from 2016 and up - VXR (1.8L) from 2012 to 2019 - VXS (1.8L) from 2012 to 2016 Reference: RY13062
Hydroturf saddle cover, HT Premier model for Yamaha jet-ski: - FX HO Cruiser from 2014 to 2017 - FX SHO Cruiser from 2014 to 2016 - FX SVHO Cruiser from 2015 to 2018 - Limited from 2015 to 2018 Reference: AZ-SEWFX22
Hydroturf saddle cover, HT Premier model for Yamaha FX HO & SVHO jet skis from 2019 and up Reference: AZ-SEWFX3
Hydroturf seat cover, HT Premier model for Yamaha FX HO Cruiser, SVHO Cruiser and Limited jet skis from 2019 and up Reference: AZ-SEWFX3C
Multi-color trigger set (Blue, Gray and Red) from RIVA Racing for Yamaha jetskis with the RiDE system from 2021 and up. Reference RY24160-RCL
RIVA Racing High Volume Fuel Pump Kit (340 L/H) for Yamaha1800 Jetski Ref: RY12040-340FP-KIT
Riva Valve Lifter Tool for Yamaha 1.8L and Kawasaki 1.5L Ref: RY19040-VCT
Wiseco 86mm (8.6:1) Piston for Yamaha 1.8L from 2009 to 2012 Ref: 40049M08600 Bore 86mm | Ratio 8.6:1 Supplied with segments, clips and axle.
Riva shovel scoop for Yamaha HO / SHO / SVHO 2012 and up Ref: RY22070
Universal jet ski dump valve, from HKS, model Super SQV4 Reference: 71008-AK001
PLX brand wideband air and fuel sensor module for RIVA Racing Maptuner Reference: 897346002726
Propellers for all Yamaha 4-stroke jet skis: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, made of high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for best performance in both acceleration and speed.
WORX Racing Compressor Rebuild Kit for Yamaha 1800 Compressed Jet Ski (SHO, FZR, FZS, SVHO) Ref: WR04051
Housing + electronic trigger Left side (Brake) with Trim, from IDIARTEC for Yamaha FX HO / SHO / SVHO jet ski Reference: BGG-SHO
IDIARTEC sand filter Ref: IDT-FAS Machined from solid marine grade aluminum filter housing with calibrated stainless steel filter to stop impurities that could clog the engine cooling circuit. Supplied with straight and elbow brass fittings.
3-piece Jettrim mat for Yamaha HO/ SHO/ SVHO jet ski 2012 and up ref. YSHO/HO101
Propellers for all Yamaha 4-stroke 1800cc jet skis: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, made of high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for best performance in both acceleration and speed.
Riva O2 sensor mounting kit for Yamaha 1.8L 2012+ Ref: RY15040-TP-O2
3 fuel can holders for jet skis Reference: 52-4911
Professional lifting tool for hand jets and jet skis 1, 2, 3 seats & SUV up to 700kgs Reference: RY1027 / RY1027-20 / 011-1000 / 011-10001 / 011-1501 / 011-2001 / 12-511 / RR20050601 / RR20050602 / RR20050603
High Performance Valve Guides from RIVA racing for Yamaha 1.8L jet ski Reference: RY19040-PVG-KIT
Housing + electronic trigger right side (accelerator) from IDIARTEC for Yamaha VX HO, FX HO, FX SHO, FX SVHO? FZR SVHO, FZS SVHO and GP1800 jet ski Reference: BGD-SHO
Riva 86mm Reinforced Cylinder Head Gasket for Yamaha 1.8L Ref: RY10040-CHG-86
87MM CYLINDER HEAD GASKET FOR YAMAHA FX-SHO/FZR/FZS Ref: RY10040-CHG-87
RIVA VALVE LIFTING TOOL FOR SEADOO RXP/RXT/GTX-SC Ref: RS19050-VCT
Supports for 2 fuel cans for jet ski Reference: 52-4910
88mm engine sleeve from LA Sleeve R&D for Yamaha 1.8L jet ski all models Ref: YA-5688B
Reinforced compressor bearing from RIVA Racing for Yamaha SVHO / FZR / FZS / SHO jet ski Ref: RY17040-HDSCB-6S5
WORX Racing Anti-Cavitation Turbine Cone for Yamaha SVHO Jet Skis Ref: WR06019
3 bar (29.7 PSI) pressure regulator box from RIVA Racing for Yamaha SHO jet skis from 2011 to 2016, SVHO from 2018 to 2019, GP1800R 2019 and up Ref: RY11740-MS-3
Worx Cooling Kit for Yamaha 1.8L Ref: WR04032 Our new Yamaha engine block cooling plate allows up to 3 fittings to be fitted for maximum water flow. Targeted injection points and directs initial cooling around the #2 cylinder which is known for detonation and overheating in high performance applications. This anodized part allows 1, 2 or 3 fittings to be...
RecDeck Cooler Bags for Jetski Yamaha FX References: F3X-F48A0-V0-00
RIVA Racing Engine Breather Kit for Yamaha 1800 jet skis from 2012 and up Reference: RY19040-BCC
WATCON Tool for Re-pitching Propellers ref. IMP-142 for propeller from 140 to 142mm ref. IMP-148 for propeller from 144 to 148mm ref. IMP-160 for propeller from 155 to 160mm
RIVA Racing Intake Manifold Ring Kit for Yamaha SVHO Jet Ski (18+) Ref: RY12080-IMUK
COMETIC Reinforced Cylinder Head Gasket for Yamaha 1800 Available in 030" or 040" Ref. C6221-88-030 or C6221-88-040
RIVA Racing Water Pump Strainer Kit for Yamaha 1800 jet skis from 2014 to 2019 Reference: RY1013-WS-80
RIVA Racing Water Pump Strainer Kit for Yamaha 1800 jet skis from 2020 and up Reference: RY1013-WS-82
Maptuner HDMI recording cable from RIVA Racing for Yamaha, Kawasaki jet ski Reference: 01-MT061
PROX piston kit (piston + segments + pin + circlips) for Yamaha 1800 jet-ski (VXR, VXS, FX HO, FX SHO, FX SVHO, FZR, FZR SVHO, FZS, FZS SVHO, GP1800 ...) ref. 01.2909.X
Hydroturf mat for Yamaha FX HO, HO Cruiser, SVHO and SVHO Cruiser jet skis from 2019 and up ref. HTFX3 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be returned or exchanged.