Subcategories
Hydroturf Seat Cover, HT Premier model for Yamaha FX HO and SHO jet skis from 2012 to 2018 Reference: AZ-SEWFX11
Riva Titanium Valve Spring Retainer Kit (16) for Yamaha 1.8L Ref: RY19040-SRU
Hydroturf Seat Cover for Yamaha FX Cruiser HO + FX Cruiser SHO Jet Skis from 2012 to 2013 Reference: SEWFX21
Hydroturf Seat Cover for Yamaha Jet Ski: - FX HO Cruiser from 2014 to 2018 - SHO Cruiser from 2014 to 2016 - SVHO Cruiser from 2014 to 2018 - Limited from 2014 to 2018 Reference: SEWFX22
RIVA Racing air filter kit for Yamaha jet ski: - FX SHO from 2012 to 2016 - FX SVHO from 2014 to 2018 Reference: RY13070-1
SOLAS 155MM TURBINE BODY YAMAHA SHO / FZR / FZS / HO / VXR / VXS / XLT 800 / 1200 / SUV / GP 800 R / 1200 R Reference: RY33-155-YF
WORX Shovel Scoop for Yamaha HO / SHO (12+) ref. WR237
MAPTUNERX DATA LOGGING APPLICATION Ref.: RY11UNI-LOG
Data acquisition systems Ref: INN-3877
Tialsport Q-series blow-off valve kit from RIVA Racing in 50mm / 8 PSI for Yamaha and Seadoo jet skis equipped with a compressor. Reference: 002588
Universal jet ski dump valve, from HKS, model Super SQV4 Reference: 71008-AK001
WORX Racing Compressed Discharge Kit for Yamaha Jet Skis Ref: WR04021
Lucky 13 Performance anti-cavitation turbine cone for Yamaha HO (08-16), SHO (08-16), VXR / VXS (11-16), FZR / FZS (08-16). Made from high quality aluminum, this part is supplied with interchangeable rings that will allow you to adjust your turbine to obtain the best performance. Ref: L13-YAM
WORX Racing Direct Intake Kit for Yamaha 1800 Compressed Jet Ski (SHO, SVHO, FZR, FZS, GP1800) Ref.: WR04020
Hydroturf Seat Cover for Yamaha FX HO, SHO, SVHO Jet Skis from 2012 to 2018 Reference: SEWFX11
Solas 155mm Turbine Body for Yamaha ref. YFS-HS-155
Main casing screw kit for Yamaha 1.8L Ref: RY10840-CMSK-1LB
Pressure regulator kit from the RIVA RACING brand in 24.9psi for jet ski from Yamaha model SHO and SVHO from 2011 and more Reference: RY11740-MS-4
High Flow Injection Rail from RIVA Racing for Yamaha 1800 jet skis all models Reference: RY12040-BFR
Solas by RIVA propeller for Yamaha 1800 (HO / SHO / VXR / VXS / FZR / FZS) from 2009 to 2016 Reference: YS-DF-13/22R Solas propeller in high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. This propeller will allow you to exploit the power of your engine. Optimized for the best performance on mid-range...
RIVA RACING Engine Cooling Upgrade Kit for Yamaha SHO Jet Ski Ref: RY10041-ECUK-PC
RIVA RACING Engine Cooling Upgrade Kit for Yamaha SVHO Jet Ski Ref: RY10041-ECUK-PC-2
Hydroturf mat PRO SERIES version for Yamaha jet skis - FX SHO from 2012 to 2016 - FX SHO Cruiser from 2012 to 2016 - FX HO & HO Cruiser from 2012 to 2018 - FX SVHO & SVHO Cruiser from 2012 to 2018 Reference: PRFX2 All Hydroturf Products are made to measure and individually. They require a minimum manufacturing time of 15 working days. They will not be...
RIVA Cylinder Head Stud Kit for Yamaha SHO / FZR / FZS Ref: RY10040-HSK
Riva Free Exhaust for Yamaha FX HO and FX SHO 2012+ / FX SVHO Removes the noise reduction system and keeps the original exhaust outlet. ref. RY16070
RIVA Racing air filter kit for Yamaha jet ski: - GP 1800R HO (1.8L & 1.9L) from 2020 and up - FX HO (1.8L & 1.9L) from 2012 and up - VX HO (1.8L & 1.9L) from 2016 and up - VXR (1.8L) from 2012 to 2019 - VXS (1.8L) from 2012 to 2016 Reference: RY13062
WSM adaptable compressor bearing kit for Yamaha 1800 jet skis from 2011 to 2021 Reference: 010-131K
RIVA Racing High Volume Fuel Pump Kit (340 L/H) for Yamaha1800 Jetski Ref: RY12040-340FP-KIT
Riva shovel scoop for Yamaha HO / SHO / SVHO 2012 and up Ref: RY22070
Riva Valve Lifter Tool for Yamaha 1.8L and Kawasaki 1.5L Ref: RY19040-VCT
Professional lifting tool for hand jets and jet skis 1, 2, 3 seats & SUVs up to 700kgs Reference: RY1027 / RY1027-20 / 011-1000 / 011-10001 / 011-1501 / 011-2001 / 12-511 / RR20050601 / RR20050602 / RR20050603
Wiseco 86mm (8.6:1) Piston for Yamaha 1.8L from 2009 to 2012 Ref: 40049M08600 Bore 86mm | Ratio 8.6:1 Supplied with segments, clips and axle.
PLX brand wideband air and fuel sensor module for RIVA Racing Maptuner Reference: 897346002726
Propellers for all Yamaha 4-stroke jet skis: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, made of high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for best performance in both acceleration and speed.
WORX Racing Compressor Rebuild Kit for Yamaha 1800 Compressed Jet Ski (SHO, FZR, FZS, SVHO) Ref: WR04051
Housing + electronic trigger Left side (Brake) with Trim, from IDIARTEC for Yamaha FX HO / SHO / SVHO jet ski Reference: BGG-SHO
IDIARTEC sand filter Ref: IDT-FAS Machined from solid marine grade aluminum filter housing with calibrated stainless steel filter to stop impurities that could clog the engine cooling circuit. Supplied with straight and elbow brass fittings.
3-piece Jettrim mat for Yamaha HO/ SHO/ SVHO jet ski 2012 and up ref. YSHO/HO101
Propellers for all Yamaha 4-stroke 1800cc jet skis: (see the correspondence table at the bottom of the page) - Solas Concord or Dynafly Series propeller, made of high quality stainless steel and polished finish for better fluidity and less turbulence in the turbine. - Optimized for best performance in both acceleration and speed.
3 bar (29.7 PSI) pressure regulator box from RIVA Racing for Yamaha SHO jet skis from 2011 to 2016, SVHO from 2018 to 2019, GP1800R 2019 and up Ref: RY11740-MS-3
Riva O2 sensor mounting kit for Yamaha 1.8L 2012+ Ref: RY15040-TP-O2
3 fuel can holders for jet skis Reference: 52-4911
WSM adaptable compressor bearing for Yamaha 1800 jet skis from 2011 to 2021 Reference: 010-131
High Performance Valve Guides from RIVA racing for Yamaha 1.8L jet ski Reference: RY19040-PVG-KIT
Housing + electronic trigger right side (accelerator) from IDIARTEC for Yamaha VX HO, FX HO, FX SHO, FX SVHO? FZR SVHO, FZS SVHO and GP1800 jet ski Reference: BGD-SHO
87MM CYLINDER HEAD GASKET FOR YAMAHA FX-SHO/FZR/FZS Ref: RY10040-CHG-87
Riva 86mm Reinforced Cylinder Head Gasket for Yamaha 1.8L Ref: RY10040-CHG-86
RIVA VALVE LIFTING TOOL FOR SEADOO RXP/RXT/GTX-SC Ref: RS19050-VCT
Reinforced compressor bearing from RIVA Racing for Yamaha SVHO / FZR / FZS / SHO jet ski Ref: RY17040-HDSCB-6S5
88mm engine sleeve from LA Sleeve R&D for Yamaha 1.8L jet ski all models Ref: YA-5688B
WORX Racing Anti-Cavitation Turbine Cone for Yamaha SHO Jet Ski Ref: WR06008
Worx Cooling Kit for Yamaha 1.8L Ref: WR04032 Our new Yamaha engine block cooling plate allows up to 3 fittings to be fitted for maximum water flow. Targeted injection points and directs initial cooling around the #2 cylinder which is known for detonation and overheating in high performance applications. This anodized part allows 1, 2 or 3 fittings to be...
RecDeck Cooler Bags for Jetski Yamaha FX References: F3X-F48A0-V0-00
RIVA Racing Engine Breather Kit for Yamaha 1800 jet skis from 2012 and up Reference: RY19040-BCC
IDIARTEC reinforced engine mount for Sea-Doo RXT / RXP 260 Ref: IDT-SMRXT
WATCON Tool for Re-pitching Propellers ref. IMP-142 for propeller from 140 to 142mm ref. IMP-148 for propeller from 144 to 148mm ref. IMP-160 for propeller from 155 to 160mm
COMETIC Reinforced Cylinder Head Gasket for Yamaha 1800 Available in 030" or 040" Ref. C6221-88-030 or C6221-88-040
RIVA Racing Water Pump Strainer Kit for Yamaha 1800 jet skis from 2014 to 2019 Reference: RY1013-WS-80
PROX piston kit (piston + segments + pin + circlips) for Yamaha 1800 jet-ski (VXR, VXS, FX HO, FX SHO, FX SVHO, FZR, FZR SVHO, FZS, FZS SVHO, GP1800 ...) ref. 01.2909.X
Supports for 2 fuel cans for jet ski Reference: 52-4910